Spectra Precision ProFlex 800 Reference Manual - Manual (Page 369)

355
Set Command Library
Example
Entering parameters defining the embedded NTRIP caster:
$PASHS,CST,PAR,2102,83.165.25.14,password,10,NTRIP Caster
ProFlex800,Ashtech,FRA,47.10,-1.00,123.12.132.12,2101,My
s2
Host domain name or IP address of the
NTRIP caster.
By default, the address of the NTRIP
caster is the receiver’s IP address. In
this case, s2 does not need to be spec-
ified. If another IP address is used,
please mention it as s2.
128 characters
max.
x.x.x.x
s3
NTRIP caster password. This pass-
word is used by NTRIP servers (data
sources) to connect to the NTRIP
caster.
32 characters
max.
d4
Number of simultaneaous connections
per user.
1-100 1
s5
NTRIP caster identifier. Use this field to
provide more information describing/
identifying the NTRIP caster.
100 characters
max. ProF-
lex800
s6
NTRIP caster operator: Name of the
institution, agency or company run-
ning the caster.
100 characters
max.
Ashtech
s7 Country code 3 characters FRA
f8
Latitude, in degrees with two decimal
places.
±90.00 0.00
f9
Longitude, in degrees with two decimal
places.
0.00 to 359.99 0.00
s10
Fallback caster IP address. (Fallback
caster: the caster where to connect to
in case this one breaks down).
128 characters
max
0.0.0.0
d1 Fallback caster IP port number 0, 100-65535 0
s12
Network identifier, e.g. name of a net-
work of GNSS permanent stations. 100 characters
max
-
s13
Network operator: Name of the institu-
tion, agency or company running the
network.
100 characters
max
-
c14
Fee indicator:
• Y: Usage is charged
• N: No user fee
Y, N N
s15
Web address where network informa-
tion can be found. 100 characters
max
-
s16
Web address where data stream infor-
mation can be found. 100 characters
max
-
s17
Web or email address where registra-
tion information can be found. 100 characters
max
-
*cc Optional checksum *00-*FF
Parameter Description Range Default