Spectra Precision ProFlex 800 Reference Manual - Manual (Page 181)

167
Web Server Help Files Collection
Then set the radio parameters:
Mode
Specify the type of this serial port (RS232 or
RS422), if relevant (only port A may be RS422).
MDP
RTS/CTS
Enable or disable the handshaking protocol on this
port (except U-Link TRx and Magellan UHF).
CTS
Parameter Designation $PASHS
Load radio
settings but-
ton
(All radios except ARF7474A NA) First click on this
button to load the current settings of the chosen
radio type (“Loading..” is displayed in the Channel
field while these settings are being loaded).
As a result, the Channel, Protocol, Current Power
and Airlink Speed fields are refreshed to view the
current radio settings.
$PASHQ,
RDP,PAR
Channel
(All radios except ARP7474A NA) Choose one of
the available channels for this radio.
RDP,PAR
Protocol
(For U-Link TRx and Pacific Crest radios only)
Choose one of the protocols below:
• DSNP (U-Link TRx only)
• Transparent
• TrimTalk (PDL HPB/LPB only)
• TrimTalk450S (ADL Vantage/Vantage Pro only)
• SATEL (ADL Vantage/Vantage Pro only)
• TrimMarkII/IIe (ADL Vantage/Vantage Pro only)
• TT450S (ADL Vantage/Vantage Pro only)
• TRIMMARK 3 (ADL Vantage/Vantage Pro only)
• Transparent FST (ADL Vantage/Vantage Pro
only)
• U-Link (ADL Vantage/Vantage Pro only)
RDP,PAR
Airlink Speed
(For U-Link TRx and Pacific Crest radios only)
Choose one of the baud rates below:
• 4800
• 7600 (U-Link TRx only)
• 9600
• 19200 (PDL HPB/LPB only)
RSP,PAR
Forward Error
Correction
(For Pacific Crest radios only)
Choose whether this option must be enabled or not
in the transmitter:.
• Button on: Enabled
• Button off: Disabled
RDP,PAR
Scrambler
(For Pacific Crest radios only)
Choose whether this option must be enabled or not
in the Pacific Crest transmitter:
• Button on: Enabled
• Button off: Disabled
RDP,PAR
Parameter Designation $PASHS