Spectra Precision ProFlex 800 Reference Manual - Manual (Page 478)

464
Set Command Library
Example
Stopping the programmed sessions immediately:
$PASHS,SES,OFF*53
Relevant Query
Command
$PASHQ,SES
See also $PASHS,SES,ON
$PASHS,SES,PAR
SES,PAR: Session Recording Parameters
Function This command is used to define all the parameters you want
the receiver to use when running the programmed recording
sessions.
Command Format Syntax
$PASHS,SES,PAR[,DAY,d1][,OFS,d2][,SIT,s3][,MEM,d4][,RNX,d5]
[,CMP,d6][,DEL,d7][,MOV,d8][,DST,d9][,PTH,s10][,FTP,d11]
[,SLP,c13][,GLO,s14][,SBA,s15][,GAL,s16][,PER,d17][PE2,d18][*cc]
Parameters
Parameter Description Range Default
DAY,s1 Session reference day 1-366 1
OFS,d2 Session offset (mmss) 0000-5959 0
SIT,s3
Sitename (from which the G-file name is
derived)
4 characters 0000
MEM,d4
Memory location:
• 0: Internal memory
• 2: USB key
0, 2 0
RNX,d5
RINEX conversion:
• 0: No conversion
• 1: Conversion to RINEX v2.11
• 2: Conversion to RINEX v2.11, Hatanaka
• 3: Conversion to RINEX v3.01
• 4: Conversion to RINEX v3.01, Hatanaka
RINEX conversion will not take place if the
recording rate during sessions is less than 1
second. In this case an alarm will be raised.
0-4 2
CMP,d6
File Compression:
• 0: No file compression
• 1: tarZ
0-1 1