Relevant set command, See also, Function – Spectra Precision ProFlex 800 Reference Manual User Manual
Page 555: Command format, Response format
541
Query Command Library
Parameters
Example
$PASHQ,DRI
$PASHR,DRI,1.00*18
Relevant Set
Command
$PASHS,DRI
See also
$PASHQ,ATM
$PASHQ,REC
DST: Connection Modes for the Different Data Streams Available
Function
This command allows you to read the current settings for
each of the Ix ports on which data streams have potentially
been enabled.
Command Format
Syntax
$PASHQ,DST[,s][*cc]
Parameters
Response format
Syntax
$PASHQ,DST,d1,s2,s3,d4,d5,d6,s7*cc
Parameters
Parameter
Description
Range
f1
Current raw data recording rate
0.05 s
0.1-0.9 s
1-999 s
*cc
Checksum
*00-*FF
Parameter
Description
Range
s
Interrogated data stream port. If s is omitted, the current
settings of all the ports are listed.
I1-I9
*cc
Optional checksum
*00-*FF
Parameter
Description
Range
d1
Number of data streaming ports
9