ETC Congo Family v6.4.0 - Manual (Page 148)

146
Two Scene Masters (6.0)
The most exciting addition to Congo V6 is the playback mode called Two Scene Masters.
This is the default setting for the Jam Mode switch. See Play Settings - Masters.
Two scene masters takes old school improvisation where channels could be preset blind and
then faded onto stage to a new level.
• The top twenty master faders are blind
• The lower twenty masters are live
You can set up and record anything on the top masters, and then fade on your choice of
fade time into these settings. Once the fade is complete, all settings in the top masters have
been loaded to the lower masters - which means that you have live control of them.
Fading Two Scene Masters (6.0)
To fade the settings and content of the top row of masters (blind) into the bottom row of
masters (live) press START or GO on the Masters Playback.
You can enter a time before pressing START or GO. This time will continue to be used until
a new time is entered.