ETC Congo Family v6.4.0 - Manual (Page 153)

151
Device Masters Option - Create Beam Palettes
Direct Selects in the fourth (lower right) section are used for Beam Palettes (1-10). Beam
Palettes are not generated automatically. If there are Beam Palettes 1-10 they are displayed.
If not it is easy to update/record them.
Record Beam Palettes
1. Select all Devices in Master 1 by pressing the master key for that Playback. The
LED in the Master key will light up. All Devices of the first type are select.
2. Select BEAM parameters for the Main Display of the console.
3. Use the wheels and wheel keys to set Beam parameters.
4. Hold RECORD and press a Direct Select key to store. There will be a popup where
you can enter a Text.
5. Press MODIFY to confirm.