ETC Congo Family v6.4.0 - Manual (Page 200)

198
Preferred Help Language
Select a language with MODIFY and confirm with MODIFY.
Locale
This will change the way dates are entered, and the international keyboard setting.
Fileserver Patch
This is the default location to save show files. The full path must be typed in and specified in
a legal Windows format.
Example
D:\congo\backup (internal path/folder)
\\anders\playfolder (external server name/folder)
\\192.168.1.1\plays (external IPaddress/folder)
Inverse LCD
Inverts the colors for the Master and Direct Select LCD's in the console facepanel.
Channel Downgrade
Reduces the number of control channels in a system. Default is 1,024 channels, but this may
be increased to 3,072 on any Congo system.
Swap 0 & C
Swap the physical location of the numerical keypads 0 and C buttons (do so in the console
as well physically).
At Mode
Sets At Mode for the console. An indicator will show that it is active, in the status bar at the
bottom of all screens.
At Mode point style
This allows you to enter levels "5.5" for 55 and then ".6" for turning that into 56.
Auto Close Tab Mode
When this is checked you will close the previous tab when opening a new one, to keep the
number of tabs down.
Calibrate Touch Screens
You can calibrate ETC TouchKit or ELO touch screens here