ETC Congo Family v6.4.0 - Manual (Page 932)

930
Remote Control - Introduction (6.0)
There are a number of options for remote controlling a Congo system.
There are three main kinds of wireless remote controls.
RFR Phone Remote iRFR
The RFR Radio/USB
Remote is equipped
with a display and bi-
directional
communication.
A wireless phone can
be connected to the
RJ11 connector in the
back and be used for
basic remote functions.
iRFR is a software for
iPhone and iPod that
provides bi-directional
communication over a
wireless LAN.
NOTE
To clear input from the Remote Fields go to the Clear Remote Fields
node in the Remote Controls Node.
See
Remote Controls .
Remote Control are enabled in the System Settings for remotes to
work. There is a specific setting to enable recording from the
Remotes. Both are ON by default.
See
System Settings - System .