ETC Congo Family v6.4.0 - Manual (Page 793)

791
Masters - Palettes (6.1)
You can load and activate palettes from master playbacks. They are displayed with a
"Fo,Co, Be, Pa" before the number in the master displays.
Once a palette is loaded onto a master you can use the master to activate the palette for
selected channels:
• Use the master fader to fade manually to the palettes levels
• Use the master key to snap to the palettes levels
• Use #, then press the Master Key to fade to the palette's levels in # seconds
• Hold MODIFY and press the master key to open the Palette Editor (6.1)
NOTE
The fader will fade the attributes of the selected channels to the
palette values when moved up. What happens when you move the
fader down depends on the setting of Return To in the Master
Settings.