ETC Congo Family v6.4.0 - Manual (Page 954)

952
Function Key Feedback
Select a channel [#] [CH] Channel is selected
Add channels [#] [THRU]
[#] [FUNC] [+] Channels are added to
selection
Subtract channels [#] [FUNC] [-] Channels are subtracted
from selection
Select Group [#] [FUNC] [Group] Channels in Group # are
selected
Select All [FUNC] [All] Selects all channels with a
level that were set from
the remote
Set to Full [FUNC] [100%] Levels for the selected
channels are set to full
Set to 0% [FUNC] [0%] Levels for the selected
channels are set to zero
Set to level [#] [@Level] Level # is set for selected
channels
Increase/decrease
levels [FUNC] [+%]
[FUNC] [-%] Levels for the selected
channels are changed
up/down. Hold the [+%] or
[-%] keys to have the
channel fade up/down.
Check mode [FUNC] [Check+]
[FUNC] [Check-] Steps to the next/last
channel using the level
See Check mode (add link
to "Channels - Check
Mode" chapter)
GO [FUNC] [Go/Goto] Next crossfade is started
GO Back [FUNC] [Go Back] Crossfades to the previous
step
GOTO a
preset/step [#] [FUNC] [Go/Goto] Crossfades to preset # or
step # (depending on the
GOTO jumps to setting in
Setup)
Record preset [#] [FUNC] [Record] Records Preset # into the
Preset List. Only the levels
set from the remote are
recorded
Update [Update] Updates the preset that
was last activated from the
remote
Load levels from [#] [FUNC] [Preset] Levels from Preset # are