ETC Congo Family v6.4.0 - Manual (Page 708)

706
Dynamics - Size & Rate
Each Dynamic Effect has a Size (amplitude) and Rate (frequency) value. It is possible to
assign an intensity channel to each of them.
You can set Size and Rate for running Dynamic Effects with the wheels in the Dynamics Soft
Key Page. See
Dynamics - Control .
NOTE
From 4.2 it is no longer possible to modulate the size or rate of a
dynamic effect using another intensity dynamic effect on the size/rate
channel. This may change the behaviour of existing plays if this rare
feature has been programmed.
Size
Sets the size (amplitude) of the waveforms in a Dynamic Effect. It is set from 0-1000%.
This can be set with the first parameter wheel in the Dynamics Soft Key Page of the Main
Display in the Congo facepanel. (DYNAMICS softkey)
It can also be set in the Preset- and Live Dynamic Effects tabs.
See
Live Dynamic Effects and Preset Dynamic Effects
Size Channel
Any channel can be set to control the Size of a Dynamic Effect. At 50% it does not affect the
programmed Size at all. At 0% the Effect is stopped, and at 100% the Size is doubled.
The channel is marked with SIZE in the Channel Views.