ETC Congo Family v6.4.0 - Manual (Page 45)

43
This Manual - Terminology
This manual is intended for use with the Congo lighting control system by ETC.
The on-line manual and the paper manual are the exact same document.
In order to be specific about where features and commands are found, the following naming
and text conventions will be used
• Congo processor (hardware): the computer used to run the Congo applications.
• Congo Facepanel (hardware): the control console hardware. This is also referred to
simply as the "Facepanel".
• Congo software: the application that gives you the functionality of the Congo system
controlled from the Facepanel.
• Commands in the Browser Tab are indicated like this: Browser >Files >New.
• Console keys in general are indicated in all CAPS. For example RECORD.
• Console keys in tables are have a button outline like this:
[RECORD]
• When a key is held and another key is pressed at the same time is written like this:
RECORD & MASTER
• References to other parts of the manual are indicated as underlined hyperlinks.
When viewing this manual electronically, click on the reference to jump to that
section of the manual.