ETC Congo Family v6.4.0 - Manual (Page 686)

684
Control a Dynamic Effect
As soon as a Dynamic Effect playback is selected, you can control it in two ways:
• From the console parameter wheels using U1-U3. On Congo jr these can be found
under the Device softkey or by using [C] & [FOCUS], [COLOR], [BEAM] respectively.
• From the Live Effects view.
Live Effects looks like this:
Step around with arrow keys, press MODIFY to get a dropdown, or enter a number and
press MODIFY.
NOTE
When you press MODIFY or enter a number it will be an absolute
value or a Palette value - depending on the setting in Attribute
Settings. See
Play Settings - Attribute .
Dynamic Effect Parameters
A number of parameters are combined to define the result of applying a Dynamic Template
to a channel Set or Group. You can trim all of them live by selecting the Effect Playback.
Channel Source
This can be a Set or a Group. See
Channel Sets and Groups .
Set/Group
Select which Set or Group.
Dynamic Template
Templates are pre-defined in the Dynamic Templates editor. You can create your own as
well. See
Dynamic Templates .
Size and Rate
The Size relates to how much the values will vary in relation to the base point. Rate defines
fast the result is. See
Dynamics - Size & Rate .