ETC Congo Family v6.4.0 - Manual (Page 817)

815
Master list - Columns & Functions
All of these are explained per content type in Masters - Functions .
Column Input Function
Master The number of this Master, cannot
be edited.
Content Type [MODIFY] Press MODIFY to open a dropdown
with choices of content.
See
Masters - Content
Content [#] [MODIFY] Sets the number # for the content
type.
In [#] [MODIFY] Used by START, Flash on time, Use
Master Times and Master links. If
only an In time is set, it will function
as an Out time as well.
Wait [#] [MODIFY] Used by START and Master links. It
is how long the master will stay up
before the Out time fades out.
Out [#] [MODIFY] Used by START and Master links. It
is how fast the master fade out after
a Wait time.
Flash mode [MODIFY] Toggles Flash mode on/off.
Flash level [#] [MODIFY] Sets flash level #
Solo Fade [MODIFY] Toggles Solo mode on/off. See Solo
Mode .
Page Time Shows the Master Page time that
affects all In-Wait-Out times set in
%. See
Master Page Times - Page
Time.
Mode (5.0) [MODIFY] Set Master Mode Inclusive, Inhibit or
Exclusive. See
Masters - Modes .
NOTE
Times can be set in % or in seconds. This is selected in the Settings
Attributes - you can always toggle this by holding C before pressing
MODIFY in the In/Wait/Out columns.