ETC Congo Family v6.4.0 - Manual (Page 580)

578
Preset Attribute Editor - Columns
These are the different Device parameters that are displayed for each with their current
values. For editing see
Device Views - Editing .
Function group Parameters Explanation
Channel & Level No input The number of the device is
highlighted when selected, and
red when focused with
NEXT/LAST. The level is
indicated to the right.
Device Delete Device Press DELETE to delete this
device completely*
GoOnGo AutoMark, GoOnGo
or GoInB per Device Overrides the Sequence Step
GoOnGo setting for this
particular Device.
FOCUS
parameters Pan, Tilt, Focus
Speed The parameters that exist for the
selected device are shown with
their values.
COLOR
parameters Cyan, Magenta,
Yellow, Color,
Color2, CTO, Color
speed etc... The parameters that exist for the
selected device are shown with
their values.
BEAM
parameters Focus, Iris, Zoom,
Strobe, Gobo, Gobo
<>, Gobo rot, etc... The parameters that exist for the
selected device are shown with
their values.
CONTROL
parameters Aux 1, Control,
Dummy ch's etc... The parameters that exist for the
selected device are shown with
their values.
*There is a popup to confirm deleting a device.
Preset Attribute Editor - Times
You can toggle the format of the Preset Attribute Editor to show Times and Delays by
holding FORMAT and pressing arrow DOWN or arrow UP.