ETC Congo Family v6.4.0 - Manual (Page 321)

319
Templates - Introduction
A template maps the attributes of a moving Device to the controls and functions of Congo.
Most common devices and scrollers already have templates in the library, ready to use.
General Facts
• Templates can be edited or created at any time.
• Templates are stored to and imported from Plays.
• Change a Template during a show and all similar parameters will continue
functioning.
• Table ranges can be set to control modes in devices such as the x.Spot from High
End.
• Color mix can follow intensity to dim mixing devices such as the Nesys Quadra.
• Trim the 16bit resolution to finetune control of 16bit parameters.
• Extensive scroller handling with roll libraries and individual calibration per unit.
• Assign any device parameter to a Master and store in a Master Page.