ETC Congo Family v6.4.0 - Manual (Page 570)

568
Device Control - Flip
If a moving head reaches its end position for Pan - it is possible to press FLIP (softkey in the
Device Soft Key Page) to invert the pan and tilt values so that the end position is "passed".
Observe that the result of a flip depends on the pan range of a device, and will not always be
the same position as before the flip.
1. Go to the top menu for the Main Display in the console facepanel by pressing [<--] until
you have this page.
Congo
Congo Jr & Kid
2. Press DEVICE to select the Device Soft Key page.