ETC Congo Family v6.4.0 - Manual (Page 960)

958
Visualisation - Capture
In the computer hosting Capture you need to make sure IPX is active and that the frame type
is set to 802.3. Capture will recognize Congo on the network and patch it automatically
providing Congo is set up with IPX and LINK on as described in the beginning of this
chapter.
Accessories - Visualisation Software .
Example - getting started
1. Start Capture and open the demo play Sketching.
2. Open the demo play Sketching in Congo.
NOTE
There is a plug-in for Training Projects powered by Capture. See
Media - Training Projects .
Capture can be downloaded from www.capturesweden.com
Visualisation - Blind output (6.0)
This is not available in v6 because it conflicted with the new Blind attribute handling. In
addition, it only worked on IPX protocol.