Groups - select channels – ETC Congo Family v6.4.0 User Manual
Page 351
349
Groups - Select Channels
You can add and subtract channels that are stored in Groups to/from the current channel
selection.
Function
Key
Feedback
Select
[#] [GROUP]
All channels in the
specified Group are
selected and can be
controlled by wheel or
with level functions.
Add
[#] [GROUP] & [+] All channels in the
specified Group are
added to the current
channel selection.
Subtract
[#] [GROUP] & [-] All channels in the
specified Group are
subtracted from the
current channel
selection.
Select range
[#] [GROUP]
[#] [GROUP] &
[THRU]
All channels stored in
every Group from # to
# are selected.
At mode syntax
If your Congo is set to use At Mode for channel commands, groups are selected in the same
way as channels once the GROUP key has been pressed. Press CH to return to channel
selection.
Action
Key
Feedback
Select group mode
[GROUP]
From this point all select
functions apply to
groups.
Select group
[#]
Group # is selected
Add group
[+] [#]
Group # is added to the
current selection
Subtract group
[-] [#]
Group # is subtracted
from the current
selection
Add multiple group
[#] [THRU]
Up to group # is added
to the current selection