ETC Congo Family v6.4.0 - Manual (Page 486)

484
You can activate the following of those formats directly by holding FORMAT and pressing a
key
• All channels (FORMAT & ALL)
• All non-zero channels (FORMAT & CH)
• Captured channels (FORMAT & CAPTURE)
• Parked channels (FORMAT & PARK)
NOTE
SELECTED AND USED IN PLAY = Shows channels that are recorded
in presets and Groups. If you select previously not recorded
channels, they will be shown in this view. But, when you select this
format the next time, a new scan through all groups and presets will
be made and they will disappear again if they don’t have recorded
levels.
Channel View Zoom
Hold FORMAT and use the wheel to Zoom in/out.
NOTE
Hold C & FORMAT to reset the zoom factor.