Presets - record – ETC Congo Family v6.4.0 User Manual
Page 361
359
Presets - Record
You can record the output on stage, or part of it, to a Preset. What you see in the active
Channel View is what is recorded. Normally only changed moving device parameters are
recorded.
Function
Key
Feedback
Record new
[RECORD]
Record the content of
the selected Channel
View to a new Preset
with the next free
number. You will get a
popup. See
The
Recording Popup
Record new #
[#] [RECORD]
Records preset #. You
will get a popup. See
The Recording Popup
NOTE
You can define how moving device parameters are stored in the
Record Settings. Hold SETUP and press RECORD.
A recorded Preset is always added to the Preset List (Browser
>Presets).
If there are moving devices defined and you are using "Changed"
recording mode, the first preset in an empty sequence will ask you if
you want to make a block cue.