ETC Congo Family v6.4.0 - Manual (Page 607)

605
Device Palettes - Select Stored Channels
You can Select all channels that are stored in a Palette as Each Device.
NOTE
This is not possible for palettes stored as "Each Device
Type", since no specific channels are stored with them.
Function Key Feedback
Focus channels [#] [CH] &
[FOCUS] All channels stored in
Palette # are selected in
the active Channel View.
Color channels [#] [CH] &
[COLOR] All channels stored in
Palette # are selected in
the active Channel View.
Beam channels [#] [CH] & [BEAM] All channels stored in
Palette # are selected in
the active Channel View.
Palette channels [#] [CH] &
[PALETTE] All channels stored in
Palette # are selected in
the active Channel View.