ETC Congo Family v6.4.0 - Manual (Page 336)

334
Parameter Definitions
Parameter types are defined in the first cell or the Template Editor.
Each parameter is used differently. For example, Pan and Tilt automatically belong to Focus
Palettes, and are mapped to the trackball in Parameter mode.
Press MODIFY in the Parameter cell to open the dropdown. Select with arrow keys (or use
the first letter from the keyboard) and press MODIFY to confirm.
The Parameters are picked from the Parameter Definition Editor. Parameters can be added
to this list if necessary. See
Parameter Definition Editor .
Parameter Definition Editor
The complete Parameter Definition Editor contains all to this point known parameters.