ETC Congo Family v6.4.0 - Manual (Page 940)

938
Remote Control - Phone Remote
The Phone Remote option allows you to use a standard phone -
without a phone line - to remote control channels and levels.
Connect the base station of a standard wireless phone directly to get a low-level remote
control solution. Activate the handset for an internal call (depends on the system how this is
done) and use the numeric keypad to control channels and levels directly.
Phone Remote - Functions
The handset has two available commands for each key on the unit. Numbers are accessed
directly. The *-key is used as Shift to access the functions. Press the *-key first (do not press
and hold) and then press the function. The #-key when pressed once is decimal point and
when pressed twice clears the number input.
These are the basic functions you can access from the phone remote.
In the table below # means a numbers input, while [#] equals the key # on the handset.