ETC Congo Family v6.4.0 - Manual (Page 625)

623
NOTE
Select format by pressing FORMAT.
Hold FORMAT and press Down Arrow to open up Time and Delay
rows. See
Device Times - Attribute Time Editor
Live Attributes - Columns
These are the different Moving Device parameters that are displayed for each with their
current values. For editing see
Device Views - Editing
Function group Parameters Explanation
Channel & Level No input The number of the device
is highlighted when
selected, and red when
focused with
NEXT/LAST. The level is
indicated to the right.
FOCUS Pan, Tilt, Focus Speed Current parameter values
are shown.
COLOR Cyan, Magenta,
Yellow, Color, Color2,
CTO, Color speed
etc... Current parameter values
are shown.
BEAM Focus, Iris, Zoom,
Strobe, Gobo, Gobo
<>, Gobo rot, etc... Current parameter values
are shown.
CONTROL* Aux 1, Control,
Dummy ch's etc... Current parameter values
are shown.
*Control parameters labelled "control" can be edited, but will not be stored, Aux values are
stored.
NOTE
Hold COLUMN and move wheel to change column sizes.