ETC Congo Family v6.4.0 User Manual
Page 469
Advertising
![background image](/manuals/559079/469/background.png)
467
Action
Key
Feedback
1. Select the channels to
work with
See
Channel Command
Syntax
2. Activate Balance
Mode
[BALANCE]
All other channels in the
channel view will be set
to 0% temporarily. You
can now work with the
selected channels.
3. Exit Balance Mode
[BALANCE]
The channel levels that
were muted are restored.
NOTE
It is not possible to use RECORD when Balance mode is active.
Balance Mode Key
It is possible to set the REM DIM key to function as BALANCE instead. This is done in the
System Settings.
See
System Settings - Channel
Advertising