ETC Congo Family v6.4.0 - Manual (Page 876)

874
Console Key - PRESET
The PRESET key is used to store and recall channel levels and moving device attributes.
Presets are fundamental building blocks and can be played back in masters, in sequences
and randomly in the main playback using GOTO. Every Sequence Step uses a Preset to
hold the level and attribute information for that step. The same Preset can be repeated any
number of times in any playback or sequence.
IMPORTANT: For moving devices there are different recording modes. All, Active
or Changed. This will decide what is stored in a preset. Also, there is a difference between
recording to the main playback and to a master.
• [PRESET] - Open the Preset list.
• [#] [PRESET] - Select the channels in Preset #.
• [#] [PRESET] & [CH/ID] - Select the channels and levels in Preset #.
• [#] [PRESET] & [master key] - Load preset # to that master.
For more information see Presets - Load To Playbacks .
Keyboard equivalent: [P]
Console Key - PRINT SCREEN
The PRINT SCREEN key is used to Print the selected Tab.
• [PRINT SCREEN] - Prints the selected tab to a jpg file in the Printout node of the Browser
>Files >Print... >Printouts.
For more information see Print .
Keyboard equivalent: None
Console Key - RANDOM
The RANDOM key in the Selects Soft key page allows you to randomize the order of the
channels within the current selection.
• [RANDOM] & [SELECT_2nd] - Selects every 2nd random channel
• [RANDOM] & [SELECT_3rd] - Selects every 3rd random channel
• [RANDOM] & [SELECT_Nth - Selects every Nth random channel
For more information see Channels - Random Select .
There is no keyboard equivalent.