ETC Congo Family v6.4.0 - Manual (Page 299)

297
Output Editor - Patch By Channel
As soon as a channel is selected, the Output Editor is automatically in channel mode. Select
a single channel or a range of channels to patch to Outputs. Use 0 MODIFY to unpatch.
Patch a single channel
Action Key Feedback
1. Select channel [#] [CH/ID] Channel is selected.
2. Patch to output [#] [MODIFY] A popup will ask if you
want to replace existing
output(s)*
3. Confirm [MODIFY] Patch is complete.
*
Patch a channel range
Action Key Feedback
1. Select channel range Channel functions Channels are selected
2. Patch to output(s) [#] [MODIFY] A popup will ask if you
want to patch a range of
outputs starting at #
3. Confirm [MODIFY] Patch is complete.