ETC Congo Family v6.4.0 - Manual (Page 716)

714
Dynamics - Form
Form specifies the relation between the size for the Pan and Tilt parameters. It is used to
control the behaviour of Pan/Tilt combinations like a Circle.
Normal value is 100 (displayed as "F:F") which means that both Pan and Tilt are equal in
size.
• If you enter a value between 0 and 99, this will be used as the size for the Pan
parameter showed as "0:F" to "99:F".
• If you enter a value between 101 and 200, this will be used as the size for the Tilt
parameter showed as "F:99" to "F:0".
Think of it as a continuous scale from a vertical movement through the full circle to a
horizontal movement.
This is done in the Form column of the Live- and Preset Dynamic Effects tab.
See Dynamics - Live Dynamic Effects
See Dynamics - Preset Dynamic Effects