ETC Congo Family v6.4.0 - Manual (Page 154)

152
Device Masters - Working Method (6.0)
Device Masters is based on you selecting devices and moving them to positions and colors.
On top of this you have some powerful effects that can be applied on the fly and in the tempo
of your choice. Most of this data is set up with the
Jam Mode Wizard .
Device Masters - Selecting Devices
Devices are selected from Masters.
Function Key Feedback
Select Group Master Key 1-10
(>20) The LED in the Master
Key is lit. The Group
stays selected
until another Master
Key is pressed*
Add Group [+] & [Master_Key] Both LED's are lit and
both Groups are active*
Subtract Group [-] & [Master_Key] This Group is
deactivated
Select any Device See Select Channels Any Device can be
selected with normal
Command Syntax from
the numerical keypad.