ETC Congo Family v6.4.0 - Manual (Page 763)

761
Master Playback
You can connect any master to the Master Playback controls. This gives you functions like
GO, GO BACK, STEP and TAP.
• In the Congo console this is done with the Master Playback
• In the Congo Jr console, this is done with the Main Playback
Additional keys
Other keys that control important functions for the masters are:
• MASTER = Opens the master view and selects masters
• PAGE, PAGE+, PAGE- = Control Master pages
• FLASH MODE = Configurates master buttons
• START = Can be used to start fades
• SETUP = Used in combination with the Master key to open individual settings
• MODIFY = Used in combination with the Master key to open the Master Editor
• CLEAR = Used in combination to clear content.
Master Fader Mode Switch (6.0)
The Switch with three positions next to the masters sets the 80 Master playbacks into one of
three modes.
Position Function
Channels Only Masters 1-80 will control the first 80 intensities in
the system. Select range of channels with the Direct
Selects.
Masters The normal position. Masters 1-80 are Masters 1-
80.
Jam A special mode for busking shows with different
functions. See
Jam Mode .