ETC Congo Family v6.4.0 - Manual (Page 623)

621
Device Play back - Attrib Move
Attributes can be executed in three ways
• AutoMark
• On
Go
• In
B
Depending on this setting Attributes will be executed when a step is faded in live (On Go) or
when a Step is loaded to be faded in (In B). See
System Settings - Attribute .
You can choose a setting as default depending on the style of your show - and then change
individually for any step or device. See
Sequence List .
NOTE
GoInB attributes follow the times recorded in the preset.
The old (pre v5.0) dynamics can be set to start on GO always - See
Settings - Crossfade .
AutoMark
The default setting is AutoMark but you can change this on the sequence step or in the
Preset Attribute editor. In AutoMark mode, attributes are automatically activated In B or On
Go based on the level in Live and in B.
• If the device intensity is >0% in Live, attributes are On Go.
• If the device intensity is 0% in Live and >0% in B, attributes are In B.
• If the device intensity is 0% in Live and 0% in B, attributes are On Go.)
Live view: Channels that are auto-marking are indicated with a blue background on the FCB
indicators. This indicator remains until you press GO.