ETC Congo Family v6.4.0 - Manual (Page 381)

379
Presets - Times
FCB times for moving device parameters are stored with the Preset.
• The default setting for FCB times is 100% of the main In time
• The default setting for FCB delay times is 0 seconds. If you set FCB delay times in
%, then that setting refers to main In time.
These times are executed when played back from a Sequence or from a Master Playback.
You can set them in % or as absolute times in seconds. You can select what to default to in
the Time Settings (SETUP & TIME). Hold C/Alt and press MODIFY to set the opposite of
what is currently selected.