ETC Congo Family v6.4.0 - Manual (Page 706)

704
Record Keep Dynamics (New Base Value)
Keep Dynamics will set a Keep Dynamics flag to an existing Preset. When this Preset is
played back in a Sequence it will change the Base Values for a running Dynamic Effect
without stopping it.
There are two ways of setting this. From a checkbox in the Recording Popup, or from the
Dynamics Soft Key page (described below). See
The Recording Popup .
1. Select the Dynamics Soft Key Page in the Main Display of the console facepanel by
pressing DYNAMICS in the top menu.
Congo
Congo Jr
2. Press KEEP DYNAM.
The Currently running dynamics are stored with a Keep Dynamics flag in the Preset active in
the A field of the Main Playback. Keep dynamics is shown with a waved line under the value
in the Preset Attribute Editor.
You can store to a different Preset by entering a number before Keep Dynam. The Preset
has to be recorded first.
NOTE
You can set a Keep Dynamics flag for a parameter group (Focus,
Color, Beam) by holding KEEP DYNAM and pressing either of these
keys.