ETC Congo Family v6.4.0 - Manual (Page 333)

331
Templates - Mode Tables
Range Tables make it possible to control multiple mode devices such as, for example, the
High End x.Spot.
• A set of ranges are defined for a parameter.
• The Table defines which range is used for one parameter based upon the Range
setting of another parameter.
In the High End x.Spot there are Mode parameters (color mode) that affect the function of
another parameter (color wheel). When a mode is set by selecting a Range on one function,
the corresponding Table Range will be assigned to the other parameter.
If there are both Range Tables and Ranges defined for a parameter, the Range Table will be
used if there is a corresponding range, otherwise the normal Ranges will be used.
Define A Range Table
1. Define the ranges for the different "modes" of the Device. See Device Templates -
Ranges .
2. Define Range Tables for these modes in the corresponding function parameter. Start by
opening the Range Table editor by pressing MODIFY in the Tables column of the Template
Editor.