ETC Congo Family v6.4.0 - Manual (Page 885)

883
Console Key - THRU
The THRU key is used to select a range of channels, and in combination with other keys for
additional channel functions.
• [#] [CH] [#] [THRU] - Select all channels between # and #.
NOTE
If you are operating in At Mode the syntax is "ch number - THRU - ch number".
For more information see Select Channels .
Keyboard equivalent: [/]
Console Key - TIME
The TIME key is used to set In/Out times to the sequence step in the A or B field of the Main
Playback (depending on the Time Settings).
• [#] [TIME] - Set an In/Out time to the next fade in the main playback.
• [#] [CH] & [TIME] - Set a channel time to the selected channel(s).
• [#] [TIME] & [FOCUS] - Set a parameter time.
• [#] [TIME] & [COLOR] - Set a parameter time.
• [#] [TIME] & [BEAM] - Set a parameter time.
• [#] [TIME] & [wheel parameter key] - Set a parameter time.
• [MODIFY] & [TIME] - Open the Time Editor for the step in A or B of the main
playback. Enter a number to open for a specific sequence step.
• [TIME] & [A] - Forces the setting "Times to A"
• [TIME] & [B] - Forces the setting "Times to B"
For more information see Sequences - Times , Sequence Times - Set To A or B , Master
Playbacks - Times , The Time Editor Popup .
Keyboard equivalent: [T]