ETC Congo Family v6.4.0 - Manual (Page 798)

796
Please note that some settings will make other settings invalid - for example, if you set a
master to Inhibit, the main function will be inhibit.
Function Function
Mode Inclusive = playback interacts with other
playbacks
Inhibit = fader limits the output of the group
Exclusive = fader "owns" intensities
Exclude Int from
Record Excludes Intensity from this master from recording
Master button Default = Select channels in current step as group
GO = Same as GO in the main playback
GO/Pause = Go and Pause
Start = Toggles fader to full/zero
Flash = Flashes the content
Include intensity Playback will control intensities
Attributes follow fader Not used
Fader type Add = Adds intensities HTP
Solo = Not used
Fader: Use time Fader will never fade faster than the fade time
Return to (FCB) Not used
Preset Not used
Active Parameter Lock Not used
Flash button Off = No function
Momentary = Flash when pressed
Latching = Toggles flash off/on
GoBack = Same as Go Back in the main playback
Flash type Add = Adds intensities HTP
Solo = Not used
Flash mode Intensity = Intensities only
Flash: Use time Flash will use master time
Flash Level Sets the target level for flash