ETC Congo Family v6.4.0 - Manual (Page 252)

250
For the following commands use the CLIENT key of the console.
Action Keys Feedback
Toggle Clients on/off [CLIENT] Confirmation message at
bottom of screens.
Set permission modes [CLIENT] (held) As long as CLIENT is
held permissions can be
set with the direct
selects. Currently only
Full Access and View
Only Mode are available.
NOTE
Be careful when using the client since you are making changes
directly in the server. Don't try to work on the patch from the client. In
View Only Mode, you can change the play on the main console -
which you may not want to