ETC Congo Family v6.4.0 - Manual (Page 176)

174
New (6.3)
When you want to clear the console to start with a new play, you use the "New" command
(Browser >Files >New).
Function Key Feedback
1. Select the Browser [BROWSER] The Browser is selected
on the left side of screen
1. If the Browser already
was selected - it will be
closed. Press Browser
again to reopen.
2. Go to "Files" at the top Arrow keys Files is marked in orange
3. Open the File node Right arrow Opens a subtree of
functions.
4. Select "New" Down arrow New is marked in orange
5. Load a new play [MODIFY] Opens a dialogue - see
below
If the current play has unsaved changes this dialogue will open;