ETC Congo Family v6.4.0 - Manual (Page 736)

734
2. Press INSERT in the Channel Sets List, then press MODIFY in the Parts cell.
3. Select channels, parts and distribution. See Channel Distribution Wizard .
NOTE
Helpful hint: Groups can be used to enter channel selections within
parts, if desired. If you are making a very complicated Channel Set
distribution, it may be easier to first create a Group that corresponds
to the contents of each individual Part, and then use the Groups on
masters or Direct Selects to simplify the entry of the channels in each
part. .
You can now use this set in any Content or Dynamic Effect Playback.
Edit a Set
Select the set using arrow keys. The channels and parts are shown in the top of the editor.
Function Keys Feedback
Select a Part [NEXT] [LAST] The channels will be
selected and the number
of the part is indicated in
red over the channels.
Edit a Part [NEXT] [LAST] Select/deslect channels.
No save or record
required. To add a new
part select the last
EMPTY one and select
channels.
Delete a Part [DELETE] Press DELETE to delete
the selected part.