ETC Congo Family v6.4.0 - Manual (Page 973)

971
MIDI - Standard MIDI
All MIDI functions need to be activated in the MIDI Setup. See System Settings - MIDI .
MIDI NOTES & CONTROLLERS
All keys and faders can send notes and controllers when this is activated in the MIDI
Settings.You can use MIDI notes and controllers to remote control any key or fader of the
Console. If you connect a MIDI Sequencer you can record all key presses and fader
movements in real time and play back in real time.
PROGRAM CHANGE
The Congo can be set to activate a specific crossfade when receiving a Program Change
command through MIDI. When the Program Change parameter (in MIDI Settings)is set to
"On" the board will activate a crossfade to step 0-127 when receiving Program Change 0-
127.
NOTE
You have to have a Sequence Step recorded in the board to be able
to jump to it.
You have to send both ON and OFF for notes.