ETC Congo Family v6.4.0 - Manual (Page 151)

149
Device Masters Step 1 - Check Groups
Masters 1-10 are used for Groups. These Groups are the main "handles" for improvising. If
there is specific selection of Devices you need to access fast that isn't created already,
create it.
The Jam Mode Wizard can be used to create a maximum of ten Groups will be created
starting at 101. Group number 110 on Master 10 is ALL DEVICES.
See Groups - Record and Groups - Load to Playbacks .
Device Masters Step 2 - Update Focus Palettes
Masters 21-30 are used for Focus Palettes. The first time Jam Mode is activated ten Focus
Palettes will be created starting at 101. They need to be updated because they are all set
to HOME as default. The first one is a HOME Palette - and does not need to be updated.
Updating the Focus Palettes in Master Playbacks 21-30 is the only preparation needed to set
up Jam Mode for improvising with any rig of Moving Devices. Since all Moving Devices are
generated as Groups by Device Type on Master Playbacks we suggest using these Groups
to update the Focus Palettes.
Update the Focus Palettes
1. Select all Devices in Master 1 by pressing the master key for that Playback. The
LED in the Master key will light up. All Devices of the first type are select.
2. Use the NEXT key to select them one by one and the PAN and TILT wheels (or the
Trackball in Parameter Mode) to create the first Focus.
3. Hold UPDATE and press the Master Key 22 for the second Focus palette. This will
provide an UPDATE POPUP.