ETC Congo Family v6.4.0 User Manual
Page 935
933
RFR - General Functionality
The upper display line shows information about the selected channel(s). The labels for the
soft buttons are on the two lower rows of the display. In all displays the wheel controls the
level of selected channels - except in the parameter controls display where the two encoders
control the displayed two parameters (like pan/tilt, etc...)
Top Level
Soft1-6 give direct access to basic channel functionality. Pressing MORE SK will always
return to this level. Pressing MORE SK from the Top Level will show the other menus.
All
100%
Check+
Group
0%
Check-
In all displays, the wheel controls the level of the selected channel(s).
RFR Channel functionality
The most common channel functions can be used to select channels and set levels (At Mode
Command Syntax is supported from v5.1). This includes the console shortcut C & CH to
clear all channels in A.
• CH
• +
• -
• THRU
• @LEVEL