ETC Congo Family v6.4.0 - Manual (Page 939)

937
RFR Focus Mode
Focus mode is intended for updating palettes, mainly Focus palettes.
See
Device Palettes - Focusing mode .
Press MORE SK and then FOCUSING to enter focusing mode.
Focus Color Beam
Update
1. Select a palette from the FCB list buttons. This will enter channel/parameter mode.
2. Use Next/Last/SelAll buttons to select channels. Use ParamFCB buttons to select
the parameter. Use wheels to change.
3. Press the Mode button to go back to palette select/update screen.
4. Use Update to update the palette or select a new palette with the FCB palette list
buttons.
5. Press MORE SK will leave focusing mode.
RFR Scroller Calibration
Press MORE SK and then CALIBSCR to enter Scroller calibration mode. In Scroller
Calibration you can calibrate each scroller roll individually, like on the console. Also see
Scroller rolls .
1. First, turn on the channels for which you wish to calibrate the scrollers, so you can
see when the scroller is in full frame.
2. When pressing CALIBSCR a list of channels with scrollers is shown. Select a
channel to calibrate it's scroller.
3. A list of the colors in the scroller is shown on the display. Use the left wheel to focus
a color and use the right wheel to adjust the value so that the whole frame is shown.
Changes are updated automatically (values are kept within the current frame (6.1)).
4. Use the MORE SK button to exit Scroller Calibration.