ETC Congo Family v6.4.0 - Manual (Page 229)

227
Crossfade Settings
The Crossfade Settings are general for the Main Playback.
Timing settings
Function Explanation Default
value
Default GO Time The Time used by the GO key when no
times have been assigned to a
crossfade 5
Default Go Back Time The Time used by the GO BACK key
when pressed independent of any
ongoing fades. 2
Default Out/In Time Causes the specified time(s) to be
automatically recorded into all new
sequence steps, which will be used
instead of the Default GO time.
Playback mode settings
Function Explanation Default
value
Modify Sequence Deactivate all Auto-times, Master Links
and other Autostart items for all
Sequences. Off
Build Sequence Presets recorded in LIVE will
automatically added into the Sequence
of the A/B Playback. They will always
be stored in the Preset List On
Crossfade both ways Crossfaders make a crossfade both up
and down (instead of only up). Off
Set times to Times are set directly to the Sequence
Step in the A field, or the B field B
GOTO jumps to GOTO fades to Preset numbers, or
Sequence Step numbers Preset