ETC Congo Family v6.4.0 - Manual (Page 778)

776
Masters - Channels (6.0)
You can load and play back single channels (Ch#), or a group of channels (Chs) with set
levels from master playbacks. These are stored in the current Master Page.
Once a channel is loaded to a master you can
• Use the master fader to set the level
• Use the flash key to flash the channel
• Use the master key to select the channel
Load channels to masters (6.1)
These functions are used to load channels (with levels) to masters.
Function Keys Feedback
Channels [GROUP] &
[Master_Key] The selected channel(s)
are loaded with current
level to the Master,
which is set to full to
avoid a Black Out of
these channels on
stage.The channel levels
are also cleared from A.
Single channels [CH] & [Master_Key] The selected channel(s)
are loaded at 100% to
the Master Playbacks,
starting at the one
pressed. The master
level will be set to the
level from stage and this
level will be cleared
from the A field.
Ch # at 100% [#] [CH] &
[Master_Key] Channel # is loaded at
100% to the Master.