ETC Congo Family v6.4.0 - Manual (Page 339)

337
Dimmer Curve Editor (example: Off/On Curve)
Action Key Feedback
4. Insert a position [INSERT] A position is inserted.
You can set percent,
Output and if this step
should use interpolation
to the next step.
INTERPOLATION
When Interpolation is ON the values to this point will be calculated smoothly from the
previous point. When Interpolation is OFF the value will be jumped to at this level.
NOTE
If a curve does not have a 0% and 100% rows, it will default to
0% = 0 output and 100% = 100 output