ETC Congo Family v6.4.0 - Manual (Page 149)

147
NOTE
Any changes you make to content in the top masters will be loaded
to the bottom live masters, but ONLY if the fader of the master is over
zero %.
It is possible to modify the Live masters at all times except when
there is a crossfade running between Live and Blind because of the
dipless calculation.
Create new looks in Blind and record to masters (6.0)
One way of improvising on the fly in two-scene masters mode is to use the Blind field to
create new looks, record them to the top masters and fade into them.
1. Press BLIND to activate the blind tab.
2. Select the channels and moving devices you want to modify blind, and use the parameter
wheels and palette functions to create a look.
3. Hold RECORD and press a Master key for a master in the top row to record to that
master. A popup will ask you to confirm.
4. Bring up the master fader to activate the look. Press START to fade into that look and
load it to the corresponding master in the lower "live" row.