ETC Congo Family v6.4.0 - Manual (Page 871)

869
Console Key - ON/FETCH
The ON/FETCH key is used to set channels on at the last used level, and to fetch levels for
intensities or attributes for the selected channels from any presets.
• [ON/FETCH] - Set the last recorded level to the current channel selection.
• [ON/FETCH]&[@LEVEL] - Revert (undo) changes to channel level.
• [#] [ON/FETCH] - Fetch the level from Preset # to the current channel selection.
• [#] [ON/FETCH] & [ATTRIB] - fetch attribute information from Preset # to the current
channel selection.
• [#] [ON/FETCH] & [parameter key] - fetch attribute information from Preset # to the
current channel selection.
For more information see Presets - Fetch Intensities , Device Control - Fetch/Copy .
Keyboard equivalent: [CTRL] & [+]
Console Key - OUT
The OUT key is used to set Out times to the sequence step in the A or B field of the Main
Playback (depending on the Time Settings).
• [#] [OUT] - Set an in time.
• [#] [DELAY ] & [OUT] - Set a Delay Out time.
For more information see Sequences - Times , Sequence Times - Set To A or B .
Keyboard equivalent: [CTRL] & [U]
Console Key - OUTPUT
The OUTPUT key is used to select outputs directly, regardless if they are patched or not. It
will open the Output editor where it is possible to patch by channel or output.
• [#] [OUTPUT] - Open the Output editor, and select that output. Use the level wheel
to set a level.
• [MODIFY] & [OUTPUT] - Open the Output editor with no output selected.
For more information see Patch - Output Editor .
Keyboard equivalent: [O]