ETC Congo Family v6.4.0 - Manual (Page 818)

816
Masters - Content
You can play back almost any kind of content from a Master Playback. The content can be
loaded directly or from the Master Editor. See
Load/Clear & Master Editor .
Content Function
Prs Play back Preset from fader, select channels with
Master key. Flash with Flash key.
Chs Single channels or several channels as a temporary
selection (previously called Grp).
Seq Play back Sequences. The Master key is Go. The
fader is a Grand Master for that Sequence. Connect
to the Master Playback for more functions.
Chases (old) Play back Sequences in Chase mode. The Master
key is Go. The fader is a Grand Master for that
Sequence. Connect to the Master Playback for
more functions.
Focus, Color, Beam,
Pal. Activate any kind of Palette (F, C, B, All) for the
selected channels.
Macro Assign a Macro to activate with the master key.
Dynamic Activate a Dynamic Effect for the selected
channels.
Mask Assign a Mask to activate with the master key.
Key (5.0) A master can be set as any console key. The
master key will function as this key.
Group Play back Groups from fader, select channels with
Master key. Flash with Flash key.
Layout Any Channel Layout can be assigned to a Master
Playback
Parameter Any parameter of a moving device can be assigned
to a Master Playback*
Time Master Any Master can be assigned as a Time Master for a
Sequence in Chase mode. See Chases (old).
*Can be assigned by holding a Parameter key and pressing the Master key, or from the
Master List.